Works via CAN.

Only 4 wires.

Compatible with most aftermarket ecus.

Works on R34 and R32 GTR and GTT, GTS

Compatible with MOTEC and Haltech or Grayhill 8 Button Keypad

The NGTRX is Designed to suit the blue plug Nissan RB engine.  

• Fits in stock case.
• Please check your connector matches the header in the listed photo before purchasing.  
• This ECU works for manual transmissions only.  
• This model includes an onboard 4 bar or 7 bar MAP sensor. 
• Most factory features are supported. 
•  I/O expansion options.
• This ECU will need a modification before E-Throttle is usable.

The most economic trigger upgrade for your rbxx

Compatible with all aftermarket ecus

Always a few in stock!

50mm r32 r33 r34 installed means you send your sensor and we install the disk for you.

OEM style custom dash mounts are a direct replacement for your existing cluster, with all the required mounting points to setup your new cluster in a easily reachable and accessible location.

Fits all models of the R32 AND R33 Skyline GTR/GTST/GTS.

Mounts directly into stock mounting points.

3D printed in Durable material 

Heat and stress resistant

Ships only State side.

NOTE: r33 mount is bigger hence the small price difference.

Also based on budget and POWER Goals:

-Haltech PRO PLUG IN. Flex fuel ready (21 psi map sensor)

- Haltech ELITE 2500 and PNP harness (29 psi map sensor included)

Both are great options. The difference is that the elite has more options, more RACE CAR oriented, bluetooth ready!

-AEM INFINITY 6 PNP FOR R32 R33 R34: Kit includes ecu, PNP harness, wideband kit, 3.5 map sensor kit.

-ECUMASTER is also a great ecu for only $1300. Also comes with a map sensor and  PNP Harness.

-MOTEC M1 ECU KIT:

  Here are our plug and play options for the R32 R33 & R34:

  M130 GPA R32-3-4 PNP KIT (M130 ECU, PNP Adaptor Harness, GPA firmware)

  M130 GPR R32-3-4 PNP KIT (M130 ECU, PNP Adaptor Harness, GPR firmware)

  M150 GPA R32-3-4 PNP KIT (M150 ECU, PNP Adaptor Harness, GPA firmware)

  M150 GPR R32-3-4 PNP KIT (M150 ECU, PNP Adaptor Harness, GPR firmware)

M130 is recommended for street/track cars. M150 has more inputs and outputs so oriented towards full race cars. See images for GPA GPR package details. 

-When you buy a kit, we provide a BASE TUNE that will work with our KITS. This will save you  time and money since we already invested a countless number of hours on customer cars.

 FREE BASE TUNE INCLUDED FOR ANY ENGINE COMBO.

Upgrade to r35 Coil Packs. 

Brackets are manufactured with 100% Aerospace CF. Lighter and stronger than AL and Steel.

Retains Center valley coil cover.

1400 WHP + capable.

Made with Genuine Carbon Fiber, high quality sensors, billet trigger wheel.

Replaces the oem CAS on all rb engines.

Compatible with all modern aftermarket ECUs (Motec, Haltech, Ecumaster, Link, EMtron, AEM)

No modifications to your harness or wiring.

Dyno tested to 700 WHP on a dynojet.

Works on Vcam and NON Vcam engines.

NOTE:

Requires proper ECU calibration (we offer base calibration support upon request)

Adjust air gap between sensors and trigger wheel.

It wont work with a crank trigger kit installed behind the harmonic balancer.

Due to popular demand, We spent countless hours developing a "MFD" screen for the R32 Skyline (All models GTR GTS,etc). The kit is very simple and fits perfectly on the oem dash.

We can display a lot more data than a stock R34 or  R35 GTR. Screen is much larger, brighter and fully configurable. It comes with GPS, DATALOGGING, shiftlights, warnings, alarms,  and very fancy screen layouts.

-Mount kit includes all brackets, bolts, nuts and the dash enclosure.

NOTES: All kits come with installation instructions. This kit is only compatible with AEM CD7  dash display.

* CAR MUST HAVE A STANDALONE ECU with CAN Communication.

* CD7 DASH COMES IN DIFFERENT VERSIONS, BE SURE TO SELECT THE CORRECT ONE. Al are made with carbon fiber.

*"GTR file" means we send you the cd7 cd5 file with 4 different pre-configured GTR screens.

• Ideal replacement for individual analogue gauge clusters.
• Easy to install and configure.
• User adjustable brightness control with automatic dimming.
• User configurable channels, units and alarms.
• 14 programmable, seven colour shift light LEDs.
• Odometer, Trip Meters
• Turn Signals, High Beam
• Controlled via easily accessible, face-mounted control buttons.
• Configuration via Haltech IC-7 software and USB cable.
• Screen size: 7in. Case size: 217 x 122mm (8.5″ x 4.8″)
• IP66 water resistance rating

Boost controller mount for 3 port and 4 port boost controller.

Clean and simple design.

Ships immediately !

Full kit includes fittings, mac solenoid and mounts.

3 port boost solenoid kit

4.2 wide band o2 sensor kit for ecumaster

4.9wide band o2 sensor kit for ecumaster (only works with emu black, not classic)

Flex fuel sensor kit

IAT Kit

All these kits are universal.

This coil kit has been specifically designed as a direct drop-in replacement for the OEM RB coils that simply cannot handle increased power modification.
These coil kits incorporate Genuine OEM Nissan R35 GTR Ignition coils and void the requirement for the genuine RB ignitor system.

This coil kit has been specifically designed as a direct drop-in replacement for the OEM RB coils that simply cannot handle increased power modification.
NO COILS OR HARNESS INCLUDED.  SOLD SEPARATELY

Looking for the best in aesthetics, weight savings and reliability out of your harness?  Our Pro Series harness completely replaces your old OEM harness so you can forget about those electrical gremlins.

This Wiring Specialties PRO Series harness was designed from the ground-up to exceed OEM specifications for wire quality, power/ground routing. With our optimized and 'tucked' approach the end result will be a clean and worry free installation with a guaranteed start up.

This harness is specifically engineered for a JDM RHD Nissan Skyline R32 GT-R with the RB26DETT engine. It was developed in house on an actual RB26DETT engine to ensure a perfect fit to all engine connections.